http://www.golfstakes.com/forum/messages.aspx?TopicID=5191 GolfStakes.com : Community Forum - Announcements - Cnsuperpower log Splitter into the woods - Messages en-us http://blogs.law.harvard.edu/tech/rss Jitbit AspNetForum Fri, 14 Dec 2018 19:57:50 GMT Fri, 14 Dec 2018 19:57:50 GMT http://www.golfstakes.com/forum/messages.aspx?TopicID=5191 uggs canada
canada goose jackets
adidas shoes
ugg boots
ugg outlet
uggs
coach outlet canada
coach outlet
ugg boots
canada goose jackets
coach outlet
nfl jerseys
christian louboutin boutique
nike shoes
christian louboutin
coach outlet
ugg outlet
canada goose outlet
ugg boots
canada goose
coach outlet online
uggs outlet
christian louboutin outlet
coach outlet online
coach outlet
canada goose outlet
coach outlet
ed hardy clothing
canada goose jackets
coach outlet
pandora charms
coach outlet
pandora charms
coach factory outlet
nike shoes outlet
christian louboutin outlet
pandora outlet
christian louboutin shoes
pandora outlet
coach outlet
coach outlet
coach outlet
canada goose jackets
coach factory outlet
pandora outlet
pandora charms
christian louboutin outlet
canada goose jackets
pandora jewelry
kate spade outlet
chenlili20181215]]> Fri, 14 Dec 2018 19:57:50 GMT http://www.golfstakes.com/forum/messages.aspx?TopicID=5191 Log Splitter to spend a lot of time wielding a chain saw and swinging a maul, and lots of folks build their own splitting machines to ease the workload. Now many of the homemade rigs can sever dang near anything (including, in some cases, rock!), but I've never seen an other splitter that's as easy to use as my own hydraulic machine.

I've always found that the most tiring part of chopping wood with a standard hydraulic log splitter is simply lifting the heavy rounds into position. So, I designed a different sort of wood chopper — one in which the cylinder moves vertically to slice through logs that are just placed on a ground-level platform underneath the machine's cutting edge.

Whenever I'm ready to process a load of firewood, I merely roll the chunks up to the machine and—one by one—ease them onto the low base plate, where they can be knocked apart. Then, once they're halved, I simply move each hunk back under the wedge for further division.

My log splitter's foot pedal assembly, which allows me to operate the machine and have both hands free for positioning the wood or throwing the split lengths in to a nearby pile, contributes still further to the machine 's ease of operation. The pedal is attached to a strong spring that pulls the control lever into its "up" position when I take my foot off the control. That way, I can walk away from the splitter—or roll the next to-be-chopped log into place—while the 27-inch-long cylinder continues to rise, since it will shut off automatically when the stop attached to the wedge hits the end of the valve and moves it back into the neutral position. And although I've adapted my pedal-and-valve operation to a vertical setup, it could just as easily be used to control a horizontal machine.

In order to be able to transport my log topper into the woods, I mounted the whole hydraulic system on an old automobile axle which is towed by way of a V-shaped framework (see the accompanying photo). The 5" X 10" steel I-beam (which is attached to the cylinder and wedge) is then fastened to a bracket mounted on the axle, so that it can be pivoted downward to ride on top of the middle bar of the towing apparatus.

You can see, then, that the vertical hydraulic wood splitter is an ideal, and readily transportable, tool for ail-but-effortless Forest King Log Splitter. With this efficient machine, I can reduce the biggest trees on my woodlot to a neat stack of firewood ... without having to lift a single log! And that's what I call energy conservation!]]> Sat, 25 Mar 2017 01:46:17 GMT