Michae
Posts 6
|
Original Title Maintenance Use and Advantages of Hydraulic Impact Hammer of Roofbolter 1 Check the hydraulic pipeline before starting work Visually inspect all relevant lines and connections from the pump to the hammer to the tank Tighten the loose bolts and joints and replace the damaged oil pipes and joints in time 2 Check whether the accumulator is normal If there is obvious vibration in the pipeline connected to the oil outlet of the impact hammer when the machine is running it indicates that there is a fault in the accumulator and the machine needs to be shut down immediately and repaired by professionals After the accumulator is repaired it shall be checked by professional personnel before it is put back for use Accumulators must be checked on a routine basis at most every fastest dth hammer five years to ensure that they meet the relevant code requirements The relevant specifications of the accumulator must be observed during the inspection 3 Check the wear of the impact surface of the impact hammer
It is necessary to check the wear of the impact surface of the impactor frequently and observe whether there are dents or iron filings on the impact surface at least once a month If a dent of more than 1 mm or other damage is found on the impact surface the impact hammer must be stopped immediately and repaired 4 Regular maintenance Check all bolts and pipelines once a week If there are loose bolts and oil leakage in pipelines repair them immediately 5 Check and clean the hydraulic oil filter The hydraulic oil filter should be cleaned for the first time after 50 hours of operation and then checked every 500 hours of operation Roofbolter and its use and advantage Full hydraulic anchor drilling rig has many common names such as anchor drill down-the-hole drill dth drilling hammer water drill rock drill anchor percussion drill and so on anchoring engineering of high slopes and is also suitable for down the hole bit the construction of urban deep foundation pit support anti-floating anchor rods foundation grouting reinforcement engineering holes blasting holes of blasting engineering high-pressure jet grouting piles tunnel pipe shed support holes and the like It is convenient to construct in all directions Main drilling methods conventional drilling with
he deepest drilling depth can reach 120 meters and the fastest drilling speed can reach 1 meter per second The advantage of the equipment is that the main arm can automatically extend and retract and the head can rotate 360 degrees It is suitable for operation in the case of high drilling density and has strong geological adaptability Return to Sohu to see more Responsible Editor wt-dthtools.com
|